DAP Screaming Eagle SXE 64/73.4/14 T3 Gated

DAP Screaming Eagle SXE 64/73.4/14 T3 Gated HX40 is a performance turbo in every sense of the word. With the larger compressor wheel the truck is ready to put down serious horsepower, while still offer somewhat decent driving manners. Heavy towing not recommended with this turbo. The 73.4mm turbine wheel keeps drive pressure low. More suitable for performance and higher rpm like a hot street and performance application. A tight low stall torque converter, high elevation, big tires or tall gears will really hinder your drivability. The DAP Screaming Eagle SXE is built with the latest Borg Warner SX-E technology, so a Forged Mill Wheel (FMW) and 360-degree thrust is standard.

This turbo will support a maximum of 575-650HP depending on elevation, turbine choice engine modifications. It flows approximately 82 lbs/minute.

Injector recommendations for a 1998.5-2002 with a big programmer would be 225-275HP
Injector recommendations for a 1994-1998 would be 5x.014, 5x.016, 6x.013, 7x.012
Injector recommendations for a 1989-1993 would be 5x.012, 5x.013, 5x.014, 6x.011, 7x.010, 7x.011

Items Needed for Install:
• HX40 4" Downpipe
• HX40 Clamp
• 4" Turbo Back Exhaust
• 1989-1993 will need to purchase a new oil inlet fitting or a new top oil line (recommended)
• (Recommended) Flexible Oil Drain Line for Easier Installation

Accessories Included:
• Oil Drain Gasket
• 2x 3/8 Oil Drain Mounting Bolts
• 2x 3/8" Turbo/Manifold Mounting bolts
• 2x 3/8" nuts
• T3 or T4 Turbo/Manifold Gasket