Product description
Allows fuel to enter from two points to keep that hungry P7100 Pump fed!
Hose and fitting assembly comes with hoses attached to fittings as shown in picture ready to use. Tee is tapped 1/8 NPT for pressure access (includes plug) and has an -08 male JIC(AN) connection on the end. Metric adapter fittings included Includes high quality Parker 836 blue push lock hose in this assembly. Comes with plug installed in pressure port with sealant.
Note:The plug on the front of the pump requires a 10MM hex key to remove (do NOT use a 3 /8 hex key). These plugs can be difficult to remove without an impact wrench, be careful to not strip the hex out of the plug.
Hose and fitting assembly comes with hoses attached to fittings as shown in picture ready to use. Tee is tapped 1/8 NPT for pressure access (includes plug) and has an -08 male JIC(AN) connection on the end. Metric adapter fittings included Includes high quality Parker 836 blue push lock hose in this assembly. Comes with plug installed in pressure port with sealant.
Note:The plug on the front of the pump requires a 10MM hex key to remove (do NOT use a 3 /8 hex key). These plugs can be difficult to remove without an impact wrench, be careful to not strip the hex out of the plug.